Capacitor – Robosupersun

10Uf 50V 105C Radial Electrolytic Capacitor, 5 x 11 mm

Admin — Sat, 24 Feb 2024 16:16:48 +0000

Voltage: 50V DC
Capacitance: 10uF
Tolerance: +/- 20%
Dimensions (excluding pins): 4mm (0.16") diameter x 7.8mm (0.31") height
Pin lengths: long pin - 24mm (0.95") and short pin - 19mm (0.75")

…

10uF 200V Radial Electrolytic Capacitor-Pack of 5

Admin — Sat, 24 Feb 2024 16:15:40 +0000

Electrolytic capacitors are used in huge quantities, They are able to provide a larger capacitance per volume than other types of capacitor. This gives them very many uses in circuits where high currents or low frequencies are involved. Electrolytic capacitors are typically used most in applications such as audio amplifiers of all types (hi-fi to mobile phones) and in power supply circuits.Like any other capacitor, it is necessary to understand the advantages and limitations of these capacitors to enable them to be used most effectively.

Specification:

Capacitance: 10 uF
Voltage: 200V
Tolerance: 20%
Temperature: 105 deg. C
Dissipation Factor: 0.15 (20 deg. C, 120Hz)
Ripple Current: 250mA
Dimensions: 10mm x 16mm (0.39″ x 0.63″)

Features:

High Ripple Current
Small Size
For use in Electrical Ballast, Power Supply

1000uF Electrolytic Capacitor 25 Volt – 10 Pcs BRAND NEW

Admin — Sat, 24 Feb 2024 16:14:28 +0000

Marking Temperature:0-105 degrees Celsius
Suggest operating Temperature:0-85 degrees Celsius
Capacitance:1000uF (tolerance:20%)
Rated Voltage:25V
Size:10mm*17mm

Specification:

Rated Voltage: 25V
Capacitance: 1000uF
Operating temperature: -40°C to +105°C
Lead spacing: 5mm/0.2″
Size: 1.9x1cm/0.75×0.39″
Quantity: 10 Pcs/1 Set

Features:

Radial lead type
Low ESR
High reliability
Compact size
High ripple current

10uF 400V 105°C RoHS Radial Electrolytic Capacitor Aluminum (Pack of 5)

Admin — Sat, 24 Feb 2024 16:13:24 +0000

Product Category: Aluminum Electrolytic Capacitors
Maximum Operating Temperature: + 105°C
Ideally Suited For Assembly
RoHS Compliant

…

10uf 25V DC Aluminium Electrolytic Capacitor (5 pcs )

Admin — Sat, 24 Feb 2024 16:12:13 +0000

Aluminum electrolytic capacitors are polarized electrolytic capacitors whose anode electrode is made of a pure aluminum foil with an etched surface. The aluminum forms a very thin insulating layer of aluminium oxide by anodization that acts as the dielectric of the capacitor

Specification :

Capacitance : 10uf
Voltage Rating :25V
Capacitance Tolerance :± 20%
Capacitor Terminals: Radial Leaded
Packaging :5 pcs/pack
Operating Temperature :Min -40°C
Operating Temperature :Max 105°C
Lifetime @ Temperature :2000 hours @ 105°C

Features :

Wide CV Value range for general purpose Features :
Safety vent contruction
2000 hours at 105 Degree

1000uF 50V DC Aluminium Electrolytic Capacitor (5 pcs )

Admin — Sat, 24 Feb 2024 16:11:18 +0000

Specification :

Capacitance : 1000uF
Voltage Rating :50V
Capacitance Tolerance :± 20%
Capacitor Terminals: Radial Leaded
Packaging :5 pcs/pack
Operating Temperature :Min -40°C
Operating Temperature :Max 105°C
Lifetime @ Temperature :2000 hours @ 105°C

Features :

Wide CV Value range for general purpose Features :
Safety vent contruction
2000 hours at 105 Degree

1000uF 6.3V DC Aluminium Electrolytic Capacitor (5 pcs )

Admin — Sat, 24 Feb 2024 16:10:02 +0000

Capacitance :1000uF
Voltage Rating :6.3V
Capacitance Tolerance :± 20%
Capacitor Terminals: Radial Leaded
Packaging :5 pcs/pack
Operating Temperature :Min -40°C
Operating Temperature :Max 105°C
Lifetime @ Temperature :2000 hours @ 105°C

…

1500uF 35V Radial Electrolytic Capacitor 105°C

Admin — Sat, 24 Feb 2024 16:08:22 +0000

These electrolytic capacitors provide long life and high endurance of 4000 hours to 5000 hours at 105°C in a through-hole mount package.

Specification:

Capacitance: 1500 uF
Voltage Rating DC: 35 VDC
Tolerance: 20 %
Ripple Current: 3250 mA
Minimum Operating Temperature: – 55 C
Maximum Operating Temperature: + 105 C
Diameter: 12.5 mm
Length: 20 mm
Lead Spacing: 5 mm
Product Type: Electrolytic Capacitors
Subcategory: Capacitors

Pin Configuration:

The Electrolytic Capacitors have polarity. Meaning they have a positive and negative pin. The pin which is long is the positive pin and the pin which is short is the negative pin. You can also identify the polarity using the negative strip on the capacitor label. As shown in the picture above the negative pin will be directly under the negative symbol.

Applications:

Filter circuits like High/Low pass filter etc.
Remove noise from a circuit
Smoothing ripples in converters
Fading LED circuits
Resonant circuits.

103J603V Metallized Polyester Film Capacitor

Admin — Sat, 24 Feb 2024 16:06:50 +0000

Polyester film capacitors are used in huge quantities, They are able to provide a larger capacitance per volume than other types of capacitor. This gives them very many uses in circuits where high currents or low frequencies are involved. Electrolytic capacitors are typically used most in applications such as audio amplifiers of all types (hi-fi to mobile phones) and in power supply circuits.Like any other capacitor, it is necessary to understand the advantages and limitations of these capacitors to enable them to be used most effectively.

Specification:

Operating Temperature	-40°C ~ +85°C
Rated Voltage	100VDC, 250VDC, 400VDC, 630VDC
Capacitance Range	0.001~10.0μF
Voltage Proof	175% or rated voltage for 5sec.
Capacitance Tolerance	±5%(J) ±10%(K)
Insuration Resistance	C<0.33μF R≥30,000MΩ C>0.33μF R≥10,000MΩ/μF
Dissipation Factor	≤0.1%(AT 1KHz) ≤0.2%(AT 10KHz) for 0.001 to 3μF ≤0.3%(AT 10KHz) for 3 to 10μF

Features:

Dissipation Factor is normally low and stable against high frequency and change of temperature.
High reliable because of its excellent Self-Healing performance.
Small inherent temperature rise and small size.
Epoxy resin powder coating or Epoxy DIP coating.

Application:

Recommended for high-frequency circuits like S-curve compensating circuit.
Widely used in high frequency, DC, AC and pulse circuits.

100V 2A682K 6800pF 6.8nF 5% Polyester Film Capacitor – Pack of 5

Admin — Sat, 24 Feb 2024 16:05:04 +0000

Specification:

Model Number: 2A682K
Rated Voltage: 100V
Operating Temperature: -40°C~105°C
Structure: Fixed Capacitor
Color: Army green
Capacitance Tolerance: 5%

Features:

Dissipation Factor is normally low and stable against high frequency and change of temperature.
High reliable because of its excellent Self-Healing performance.
Small inherent temperature rise and small size.
Epoxy resin powder coating or Epoxy DIP coating.

Application:

Recommended for high-frequency circuits like S-curve compensating circuit.
Widely used in high frequency, DC, AC and pulse circuits.