Radiolink Pixhawk Flight Controller Board with Power Module, Safety Switch, Three-Wire Servo Cable, Micro-SD Card, Buzzer

Admin — Fri, 01 Mar 2024 11:46:15 +0000

This Pixhawk flight controller from RadioLink has optimized the PCB layout and the barometer height hold, providing more stable flight performance even at high speed. Radiolink Pixhawk Flight Controller integrated the newest 32-bit chip technology and high-end sensors, this is absolutely one of the best flight controllers for quadcopters.

Radiolink Pixhawk Flight Controller comes with an advanced 32F427 ARM Cortex M4 Core high-performance processor, 32bit fail-safe co-processor, and MPU 6000 3-axis accelerometer. Radiolink Pixhawk Flight Controller support OSD and GPS modules and more, suited for long-wheelbase quadcopters and 6-8 axis multi-rotors.

Specifications:

Processor: 32bit STM32F427 Cortex M4 core with FPU
Frequency: 168Hz

Package Included:

1 x Radiolink Pixhawk Flight Controller
1 x Power Module
1 x SD Card
1 x Safety Switch
1 x 3-wire Servo Cable
1 x Buzzer
2 x Mounting Foam

DJI NAZA-M Lite V1.1 with GPS Kit DJI NAZA Flight Controller Kit

Admin — Fri, 01 Mar 2024 11:43:40 +0000

The DJI NAZA-M Lite V1.1 with GPS Kit is a simplified version, inheriting the high reliability and stability of the Naza M flight controller’s heritage. The Naza M Lite controller has an all-in-one design which means the installation is easy while saving space and weight. In this small flight controller, you will find inner damping, a 3-axis gyroscope, a 3-axis accelerometer and a barometer. The Naza M Lite measures flying altitude and attitude which is used for autopilot / automatic control for altitude hold, the GPS provides a position hold capability enjoyed on the Naza M V2 and DJI Wookong M flight controllers. The Naza M Lite GPS is the most cost-effective solution to offer so much from the DJI Innovations line of flight controllers.

The Naza M Lite v1.1 GPS offers three flight modes, GPS Atti. Mode, Atti. Mode and Manual Mode. The pilot can switch between these modes to achieve different flight characteristics. A new feature for the Naza M Lite GPS is the automatic adjustment while in the flight of the flight modes; the Naza M Lite v1.1 GPS will gently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure without user intervention.

Intelligent Orientation Control (IOC) means that no matter where the nose is pointing the forward direction is still the forward direction, and has nothing to do with the nose direction, there is no need to be concerned with the loss of orientation when using the IOC mode, the front will always be front, even when it’s back.

If you have a transmitter which supports failsafe features compatible with the Naza M Lite, like the Futaba 8J, you can set the failsafe through port U on the flight controller. The Naza controller has built in an auto level failsafe function, if the communication between Naza and the transmitter is lost, the outputs of all command sticks from the RC controller will default to the centre position, and the GPS module also allows you also set RTH (Return To Home) in the event of the failsafe being used. If your transmitter has only 4 channels, then MC will work in Atti—mode by default without the failsafe function.

The Naza M Lite GPS also has outputs for use with a servo-operated gimbal. Adding a gimbal to the system is easy with an easy-to-follow setup and calibration procedure. Please note the Lite will not work with the DJI Zenmuse H3 3D Brushless Gimbal.

Specification:

Weight	MC: 25gm VU: 20gm GPS: 21.3gm
Dimensions	MC: 45.5mm x 31.5mm x 18.5mm VU: 32.2mm x 21.1mm x 7.7mm GPS & Compass: 46mm(diameter)x9mm
Operating Voltage	MC: 4.8V~5.5V VU: 7.2V ~ 26.0 V (recommend 2S ~ 6S LiPo)
Power Consumption	MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V)
Operating Temperature	-10°C ~ 50°C

Basic Performance:

- - Supported Multi-Rotor: Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6
  - Supported ESC Output: 400Hz refresh frequency
  - Recommended Transmitter: PCM or 2.4GHz with a minimum of 4 channels
  - Working Voltage Range:MC:4.8V~5.5V; VU: 7.2V ~ 26.0 V (recommend 2S ~ 6S LiPo)
  - Power Consumption: MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V)
  - Operating Temperature: -10°C ~ 50°C
  - Assistant Software System Requirement: Windows XP sp3 / Windows 7 / Windows 8

Flight Performance:

- - Hovering Accuracy(GPS Mode): Vertical:±0.8m; Horizontal:±2.5m:
  - Max Yaw Angular Velocity of 200°/s
  - Max Tilt Angle: 45°
  - Ascent / Descent: ±6m/s

Hardware:

- Built-In Functions: Three Modes Autopilot; Enhanced Fail-safe; Low Voltage Protection; S-Bus Receiver Support 2-axle Gimbal Support.

Flight Controllers & Accessories – Robosupersun