Features:

• Low heat, energy saving, low power consumption, long service life.
• You could use the led diode lights to do small scientific experiment,

Applications:

• Perfect for DIY LED projects
• School science experiments
• Car decorations
• Signal indicator
• Electronic experiments

Note: Please mind the forward voltage for each compartment leds, and the positive and negative pole of the diode lights in order not to burn them out.

This is a very standard, 5mm White Led. The lens is 5mm in diameter and it is diffused. Use a 120-ohm resistor or greater if you power the led from a 5V source. A Super bright 5mm White Led is exceptionally bright with a wide beam angle, so they’re suitable for use in your projects, illuminations, headlamps, spotlights, car lighting, and models. The 5mm White Led can be used anywhere where you need low power, high-intensity reliable lighting or indication. They go quickly into a breadboard and will add that extra zing to your project. The 5mm T1 3/4 LED is the most common size of LED available.

Connection Note:

Please Note: the longer lead indicates the anode, the lead frame arrangement and “cathode flat” on the case flange may be reversed for some LEDs, always use the longer lead as the anode or test the devices first.

This is a very standard, 5mm Yellow LED. The lens is 5mm in diameter and it is diffused. Use a 120-ohm resistor or greater if you power the led from a 5V source. A Super bright 5mm Yellow LED is exceptionally bright with a wide beam angle, so they’re suitable for use in your projects, illuminations, headlamps, spotlights, car lighting, and models. The 5mm Yellow LED can be used anywhere where you need low power, high-intensity reliable lighting or indication. They go quickly into a breadboard and will add that extra zing to your project. The 5mm T1 3/4 LED is the most common size of LED available.

Connection Note:

Please Note the longer lead indicates the anode, and the lead frame arrangement and “cathode flat” on the case flange may be reversed for some LEDs, always use the longer lead as the anode or test the devices first.

Diffused 5mm RGB LED Common Anode LED makes some beautiful colours with this diffused 10mm tri-colour LED with separate red, green and blue LED chips inside! 5mm RGB LED make a nice indicator and are fun to colour-swirl. We like diffused 5mm RGB LED because they colour mix inside instead of appearing as 3 distinct LEDs. These are Common-Anode type which means you connect one pin to 5V or so and then tie the other three legs to the ground through a resistor. We carry and use CA more than CC because multi-LED driver chips (such as the TLC5940/TLC5941) are often designed exclusively for CA and can’t be used with Common-Cathode.

Specifications:

• Size: 5m
• Light Color: RGB
• Length: approx. 4.5CM
• Colour: Red / Green / Blue
• Forward Voltage: R: 2.0-2.2 G: 3.2-3.4 B: 3.2-3.4
• XY/WLD: R: 625-630 G: 517-520 B: 465-470
• Pins Sequence: RED/Common Anode(positive terminal)/Green/Blue
• LED Type: Water Clear/Diffused
• Luminous Flux: 4 – 5LM
• View Angle: Water Clear 360 degrees; Diffused 250 degrees

Connection Note:

Please Note: the longer lead indicates the anode, the lead frame arrangement and “cathode flat” on the case flange may be reversed for some LEDs, always use the longer lead as the anode or test the devices first