Lilypad – Robosupersun

3~5v SMD Orange LED Module for Lilypad

Admin — Thu, 29 Feb 2024 16:02:26 +0000

Working voltage 3-5V
Working current 40MA
3.2mmx1.6mm SMT LED, 0.75mm Thickness
Low Power Consumption
Wide Viewing Angle
Led Color - Orange

…

LilyPad Tri-Color LED RGB Module For arduino LilyPad LED Module Tri-color

Admin — Thu, 29 Feb 2024 15:59:46 +0000

This is LilyPad Tri-Color LED RGB Module for Arduino with you can blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design – to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel. LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable.

Specification:

Outer Diameter: 20mm
Thickness: 0.8mm

Features:

Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow solder process.
Full color type

3.3V 8M Arduino Compatible LilyPad USB ATmega32U4 Development Board

Admin — Thu, 29 Feb 2024 15:58:00 +0000

LilyPad Arduino – LilyPad Development Main Board Arduino USB ATmega32u4 (replaces/upgrade for the ATmega328P) – The silver dollar sized Arduino designed for e-textile and wearable projects

8K Byte of In-System Programmable Program Memory Flash
512 Bytes In-System Programmable EEPROM
512 Bytes Internal SRAMDiameter:25mm

Feature:

A microcontroller board based on the ATmega32u4
9 digital input/output pins (of which 4 can be used as PWM outputs and 4 as analog inputs)
An 8 MHz resonator
A micro USB connection
A JST connector for a 3.7V LiPo battery
A reset button
Contains everything needed to support the microcontroller
Simply connect it to a computer with a USB cable or power it with a battery to get started
ATmega32u4 has built-in USB communication, eliminating the need for a separate USB-to-serial adapter. Which allows the LilyPad USB to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

Specification:

Microcontroller: ATmega32u4
Operating voltage: 3.3V
Input voltage: 3.8V to 5V
Digital I/O pins: 9
PWM channels: 4
Analog input channels: 4
DC current per I/O pin: 40mA
Flash memory: 32KB (ATmega32u4) of which 4KB used by bootloader
SRAM: 2.5KB (ATmega32u4)
EEPROM: 1KB (ATmega32u4)
Clock speed: 8MHz

LilyPad Buzzer Small Speakers Module Compatible with Arduino

Admin — Thu, 29 Feb 2024 15:56:33 +0000

Specifications:

Rated Voltage: 3.6V
Operating Voltage: 2.5 ~ 4.5V
Coil Resistance: 16.0±2.4 Ohm
Coil Impedance: 31.0 Ohm
Rated Frequency: 2730 MHz
Operating Temperature: -30 ~ 70°C
Storage Temperature: -40 ~ 85°C

…

White 3~5v SMD LED Module for Lilypad

Admin — Thu, 29 Feb 2024 15:54:42 +0000

This is a LilyPad LED White Color that is still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care). Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable.

Specification:

Working Voltage: 3~5V
Working Current: 40MA
Led Color:White

Features:

Low Power Consumption
Wide Viewing Angle
3.2mmx1.6mm SMT LED, 0.75mm Thickness

3~5v Red SMD LED Module for Lilypad

Admin — Thu, 29 Feb 2024 15:53:22 +0000

Working voltage 3-5V
Working current 40MA
3.2mmx1.6mm SMT LED, 0.75mm Thickness
Low Power Consumption
Wide Viewing Angle
Colour-Red

…

3~5v Green SMD LED Module for Lilypad

Admin — Thu, 29 Feb 2024 15:52:24 +0000

Working voltage 3-5V
Working current 40MA
3.2mmx1.6mm SMT LED, 0.75mm Thickness
Low Power Consumption
Wide Viewing Angle
Led- Green

…

LilyPad 328 Arduino 328 Main Board ATmega328P 16M

Admin — Thu, 29 Feb 2024 15:51:17 +0000

Description:

The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimize snagging and profile, with wide tabs that can be sewn down and connected with conductive thread.

The LilyPad Arduino consists of an ATmega328 with the Arduino boot loader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2 V to 5 V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).

Specifications:

Microcontroller Chip	ATmega168 or ATmega328V
Operating Voltage	2.7 ~ 5.5 V DC
Input Voltage	2.7V-5.5 V (Recommended)
Analog I/O Pins	6
Digital I/O Pins	14
PWM Digital I/O Pins	6
Flash Memory	16 KB
SRAM	1
EEPROM	512 bytes
DC Current per I/O Pin	40mA
Diameter	50mm

Features:

This is LilyPad Arduino – the main board consisting of an ATmega328 with the Arduino boot loader and a minimum number of external components to keep it as small (and as simple) as possible.
The board will run from 2 V to 5 V.
The latest version of the LilyPad supports automatic reset for even easier programming.
The back side of the LilyPad is now completely flat!
We now use a surface mount programming connector to keep the header from poking through.
This version of the LilyPad now uses the new ATmega328 at 8MHz.
Arduino 0016 supports the Arduino Pro Mini 328/8MHz/16MHZ.
Use this setting when using this new LilyPad 328.

CJMCU LilyTiny LilyPad Main Board Micro MCU For Arduino

Admin — Thu, 29 Feb 2024 15:49:43 +0000

The Lily ATtiny85 is a super tiny (25mm) wearable board designed to add functionality to your project without taking up a lot of room. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! With an onboard USB port, no interface card is necessary to program it – simply download the ATtiny85 drivers and program it through the Arduino IDE. The Lily ATtiny features 2 PWM ports. 5 GPIO ports. The ports can be connected via soldering or with conductive thread.

Features :

Programmable with onboard USB port and the free Arduino IDE
Great for wearables, textile projects – combine with any LilyPad sensor, power supply, and LEDs
Only 25mm in diameter!
8K Byte of In-System Programmable Program Memory Flash,
512 Bytes In-System Programmable EEPROM /512 Bytes SRAM