Getting a personal ATMEGA16 Minimum System Development Board will help to stimulate your intelligence and inspiration. A bare board may sometimes be more helpful than an assembled one for a learner. Come here and have a look at our ATMEGA16 Minimum System Development Board ISP Atmega16 Atmega32.

Adopting top-quality material and with advanced techniques, this ATMEGA16 Minimum System Development Board is authentically reliable. No soldering and no assembling, you can DIY whatever circuit you prefer. It is really a good assistant during your development.

Note: This minimum system development board without an AVR chip, you need to purchase the chip in additional!!!

Specifications:

• Support Chips: ATmega16/ATmega32
• Reset Button: YES

Features:

• MCP2515 CAN Bus Module supports CAN V2.0B technical standard, communication rate 1Mb / S.
• 0 to 8 bytes long data field.
• SPI control for expanding Multi CAN bus interface
• MCP2515 CAN Bus Module uses a serial port could view the communication data
• With an independent key, LED indicator, Power indicator
• Standard frames, extended frames, and remote frames.
• MCP2515 CAN Bus Module uses high-speed CAN transceiver TJA1050

Package Included:

1 x MCP2515 CAN Bus Module MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino

The PICkit3 Programmer allows debugging and programming of PIC and dsPIC Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer’s PC using a full-speed USB interface and can connect to the target via a Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE).

Specification:

• Input Supply Voltage: 1.8 ~ 5V
• Flash Memory: 512 Kbytes

Features:

• Full-speed USB support using Windows standard drivers
• PICkit3 Programmer has real-time execution
• Processors run at maximum speeds
• PICkit3 Programmer has built-in over-voltage/short circuit monitor
• Low voltage to 5V (1.8 to the 5V range)
• Read/write program and data memory of the microcontroller
• PICkit3 Programmer have diagnostic LEDs (power, active, status)
• Read/write program and data memory of the microcontroller
• 1Erase of all memory types (EEPROM, ID, configuration, and program) with verification
• Peripheral freeze at the breakpoint.
• Program up to 512K byte flash.

This PIC K150 Programmer is equipped with 40pin DIP programming Block, direct programming of 8pin – 40pin DIP chip. 8 pin-40 pin chip other than through the onboard the ICSP interface online to download software. Software-compatible with PIC K150 Programmer is the Windows98 and Windows2000/NT, Windows XP/windows7/ Windows 8/ Windows 10 operating system. The new device will vary with the PIC escalating. Master chip retains the DIP package with the seat.

Features:

• PIC K150 Programmer support the most popular programming PIC chips, read, encryption and other features!
• No external power supply, communication, and power is only a USB cable to print complete, without any cable.
• PICSTARTPLUS much faster rate than programming.
• PIC K150 Programmer can easily read the contents of the chip program area.
• PIC K150 Programmer has automatic programming verification.
• Comprehensive information prompts, allowing users to understand the working state.
• With 40pin ZIF programming of the seat, can be directly programmed in 8-pin to 40 pin PIC microcontroller chip can be programmed Using ICSP online or add conversion blocks. 8 pin 40 pin-board outside the chip can be downloaded directly online ICSP output.
• PIC K150 Programmer is compatible with Windows98 and Windows2000/NT, Windows XP / Windows 7 and some other operating systems.
• Programming software provides easy to use instructions.
• PIC K150 Programmer can not program CIs from family 18F

PIC MCU Models Support:

10 Series:

• PIC10F200 * PIC10F202 * PIC10F204 * PIC10F206 *
• PIC10F220 * PIC10F222 *
• 12C Series:
• PIC12C508 PIC12C508A PIC12C509 PIC12C509A
• PIC12C671 PIC12C672 PIC12CE518 PIC12CE519
• PIC12CE673 PIC12CE674
• 12F Series:
• PIC12F508 PIC12F509 PIC12F629 PIC12F635
• PIC12F675 PIC12F683
• 16C Series:
• PIC16C505 PIC16C554 PIC16C558 PIC16C61
• PIC16C62 PIC16C62A PIC16C62B PIC16C63
• PIC16C63A PIC 16C64 PIC16C64A PIC16C65
• PIC16C65A PIC16C65B PIC16C66 PIC16C66A
• PIC16C67 PIC16C620 PIC16C620A PIC16C621
• PIC16C621A PIC16C622 PIC16C622A PIC16C71
• PIC16C71A PIC16C72 PIC16C72A PIC16C73
• PIC16C73A PIC16C73B PIC16C74 PIC16C74A
• PIC16C74B PIC16C76 PIC16C77 PIC16C710
• PIC16C711 PIC16C712 PIC16C716 PIC16C745
• PIC16C765 PIC16C773 PIC16C774 PIC16C83
• PIC16C84

16F Series:

• PIC16F505 PIC16F506 PIC16F54 PIC16F57 *
• PIC16F59 * PIC16F627 PIC16LF627A PIC16F627A
• PIC16F628 PIC16LF628A PIC16F628A PIC16F630
• PIC16F631 PIC16F631-1 PIC16F636 PIC16F636-1
• PIC16F639 * PIC16F639-1 * PIC16F648A PIC16F676
• PIC16F677 PIC16F677-1 PIC16F684 PIC16F685 *
• PIC16F685-1 * PIC16F687 * PIC16F687 *- 1 PIC16F688
• PIC16F689 * PIC16F689-1 * PIC16F690 * PIC16F690-1 *
• PIC16F716 PIC16F72 PIC16F73 PIC16F74
• PIC16F76 PIC16F77 PIC16F737 PIC16F747
• PIC16F767 PIC16F777 PIC16F83 PIC16F84
• PIC16F84A PIC16F87 PIC16F88 PIC16F818
• PIC16F819 PIC16F870 PIC16F871 PIC16F872
• PIC16F873 PIC16F873A PIC16LF873A PIC16F874
• PIC16F874A PIC16F876 PIC16F876A PIC16F877
• PIC16F877A

18 Series:

Features

• USB (Full speed 12 Mbits/s interface to host PC)
• Real-time execution
• MPLAB IDE compatible (free download from Microchip)
• Built-in over-voltage/short circuit monitor
• Firmware upgradeable from PC/web download
• Diagnostic LEDs (power, busy, error)
• Read/write program and data memory of the microcontroller
• Erase of program memory space with verification
• Freeze-peripherals at breakpoint
• Program up to 512K byte flash with the Programmer-to-Go
• ICSP cable included