Relays – Robosupersun

12V 10A PCB Mount Relay – SPDT Relay

Admin — Sun, 25 Feb 2024 09:29:50 +0000

Relays can be used to control both AC and DC appliance which comply with the output rating mentioned below. Relays are used in all cases when you need to control high current AC / DC using sensor outputs or microcontroller outputs subject to the need of relay driver circuits(in some cases).

Specification:

Contact Rating: 10A 110V DC, 10A 250V AC
Power Consumption: 0.45W
Coil Voltage: 12V DC
Pickup Voltage: 9V DC
Maximum Continuous Voltage: 14.4V DC
Coil Resistance: 320Ω
Contact Arrangement: SPDT
Operating Time: 10ms Max
Release Time: 5ms Max
Drop-Out Voltage: 10% Min
Contact Resistance: 100MΩ Max
Dielectric Strength: 1000V AC 1 Minute
Ambient Temperature: -25°C to +70°C

Features:

Easy to use mounts on PCB
Rigid & High Quality Material
Compact size & Economical Price
Applicable in various Industrial Automation, Robotic Applications & Embedded Projects.

12V 7A PCB Mount Relay – SPDT Relay

Admin — Sun, 25 Feb 2024 09:28:53 +0000

A 7A 12V DC miniature PCB relay that comes in a baby sugar cube case and is suitable for general applications where high reliability and high switching capacity are needed, but where VDE approval is not required.

Specification:

Contact rating: 7A 250V AC
Coil voltage: 12V DC
Coil current: 30mA
Coil resistance: 400Ω
Coil power: 360mW
Operate time: 10ms
Release time: 5ms
Insulation resistance: 100MΩ min.
Dielectric strength: 1500V
Operating temperature: -40°C to +70°C

Features:

Small size, light weight, Low price.
Sensitive operation, good synchronism.
Low coil power consumption.
PC board mounting.

Application:

Electrical application relay
Telecommunication relay
Automatic control relay
Wireless radio remote relay control
Sound control toy relay

6VDC 30 Amp T Shape PCB Relay

Admin — Sun, 25 Feb 2024 09:27:35 +0000

Specification:

Type of Product : Relay
Type of Relay : PCB
Pole & Throw Configuration : SPDT
Contact Material : Ag Alloy
Rated Voltage : 30A @ 250VAC, 30A @ 28VDC

…

SRD-6VDC-SL-C DC 6V SPDT 1NO 1NC 5 Pins Coil Power Relay

Admin — Sun, 25 Feb 2024 09:25:40 +0000

Specifications:

Rated load: 10A 250VAC/28VDC,10A 125VAC/28VDC,10A 125VAC/28VDC
Contact resistance: =100m (ohm)
Electrical life: 100,000
Mechanical life: 10,000,000
Coil rated voltage: 3-48VDC
Coil power: 0.36W, 0.45W
Coil pick-up voltage: =75%
Coil drop-out voltage: =10%
Ambient temperature: -25 degrees Celsius to +70 degrees Celsius
Coil and contacts:1500VAC/min
Contact and contacts: 1000VAC/min
Insulation resistance: =100M ohm
Mounting form: PCB

…

5V 10A PCB Mount Relay 5V Relay DC Electromechanical Relay 50/60 Hz SPDT Relay 10A 5 PIN

Admin — Sun, 25 Feb 2024 09:23:51 +0000

The 5V 10A PCB Mount Relay is an electromechanical switching device that can control the AC or DC devices through the 5V DC relay coil. There are 5 pins in this 5V 10A PCB Mount Relay i.e, Coil end 1, Coil end 2, COM(common), NC and NO. Coil end 1 and Coil end 2 are used to trigger ON/OFF the relay. One end is connected to a 5V supply and the other is connected to the ground of the circuit. Common is connected to the one end of the load to be controlled. The other end of the load is connected to either NC or NO. If the load is connected to NC(Normally Closed) then the load remains ON before trigger. And if it is connected to NO(Normally Open) then the load remains OFF before trigger.

SPDT(Single Pole Double Throw) relay is used as a switch for high current AC/DC appliances which need to be controlled from a microcontroller or sensor output. 5V PCB Mount Sugar Cube SPDT Relay instead of its small size can switch a load of 10A connected to it. The coil resistance of this 5V 10A PCB Mount Relay is 70 ohm whereas the coil current is 100mA. The trigger voltage for this relay is 5V. This 5V 10A PCB Mount Relay is usually used in home automation, switching circuits, security circuits, etc.